Industrial

Industrial Steel Buildings

Manufacturing plants, fabrication shops and crane-ready buildings, laid out around your process and engineered for the loads it puts on the structure.

Who it's for

Built Around the Work Inside

Platinum Buildings designs and supplies pre-engineered steel buildings for industrial clients across Canada. Our clients include manufacturers, steel fabricators and welding shops, heavy equipment and fleet operators, and businesses that serve the resource sectors.

An industrial building isn’t just a shell. It holds a process: material comes in, work gets done, product goes out. Cranes, machines, mezzanines and trucks all place demands on the structure.

A pre-engineered steel building handles that well when it’s planned around the work. Our team has spent most of its time in manufacturing, so we think about how the floor will actually be used.

Common challenges

Columns in the wrong place

Interior columns that don’t suit the layout get in the way of machines, cranes and traffic for the life of the building.

Cranes as an afterthought

A crane added later can mean reinforcing frames and foundations. Planning it from the start is far simpler.

Tight schedules

Production can’t wait. The building has to be designed, approved and delivered in a sequence that works.

Growth

A building that fits today can feel small in a few years. Expansion is easier when it’s planned at the start.

Building types

Common Industrial Buildings

Industrial buildings range from a single fabrication bay to a large multi-bay plant. Sizes in our quotes are written as width × length, for example 40′ × 60′.

Manufacturing facilities

Production space laid out around your process, often with offices, washrooms and storage built in. Column spacing is planned around equipment and material flow.

Fabrication and welding shops

High-eave buildings with wide doors, crane-ready frames and room for fume extraction. Built for steel coming in one end and finished work going out the other.

Crane-ready buildings

Buildings designed from the start for bridge cranes, underhung cranes or monorails, with the runway and loads built into the frame design.

Maintenance and fleet shops

Drive-through bays for trucks and heavy equipment, with large overhead doors, pits or hoists, and heated work areas.

Industrial storage

Covered storage for materials, parts and finished goods, often attached to a production building. Racking and forklift traffic shape the layout.

Design considerations

What Shapes an Industrial Building

Clear spans and column layout

Clear span means no interior columns. It suits buildings with cranes and moving equipment. A multi-span building uses interior columns and can lower the cost of very wide buildings. We place columns where your process can live with them.

Crane loads

A crane adds heavy, moving loads to the frames. The design needs the crane’s capacity, span, hook height, type and how often it runs. Bridge cranes, underhung cranes and monorails each load the building differently.

Mezzanines

Mezzanines add floor area for storage, offices or equipment without a larger footprint. Their loads, stairs and access are designed into the structure from the start.

Bay spacing

Bay spacing is the distance between main frames. It affects where doors can go, how cranes run and how much the building costs. Wider bays give more open wall space, but each frame carries more load.

Eave height and clearances

Eave height is the height of the wall where it meets the roof. For crane buildings, it’s set by the hook height you need plus the crane’s own size. For storage, it’s set by racking height.

Doors and openings

Overhead doors for trucks, man doors for safe exits and openings for equipment all need framing designed around them. Plan large doors early, while the frame layout is still flexible.

Collateral loads

Sprinklers, lighting, ducts and heaters hanging from the roof add weight. These are called collateral loads. They need to be included in the design so the roof is sized for them.

Room to grow

If you expect to expand, an endwall can be designed so the building can be lengthened later. Future crane runways can be planned in at the same time.

How we handle it

Six Steps, With Your Sector in Mind

Every industrial project follows the same six steps. Here’s what we pay extra attention to on industrial work.

Concept

We start with your process: what comes in, what happens inside, and what goes out.

Design & engineering

Crane, mezzanine and collateral loads are confirmed before the frames are designed.

Approval

We prepare drawings to support your permit application.

Manufacturing

Components are fabricated to the approved drawings, checked with crane runways and connections in mind.

Delivery

Loads are planned around the erection sequence and your site.

Project support

We stay available to your erector and site team while the building goes up.

Read the full step-by-step process, or see what goes into design and engineering.

Planning your building

Questions to Answer Before You Call

You don’t need every answer before you request a quote. But thinking these through first makes the conversation faster and the quote more accurate.

  • How does work flow through the building? Where material comes in, where it’s worked on and where it leaves.
  • Will there be a crane? Note the capacity, span, hook height, type and how often it runs, now or in the future.
  • What hangs from the roof? Sprinklers, heaters, ducts and lighting all add load.
  • What drives through the doors? The largest truck or piece of equipment sets the door size and the frame layout around it.
  • Heating and ventilation? Welding fumes, exhaust and heat loss all affect insulation and openings.
  • Where will you grow? Knowing which way the building could extend lets us design the endwall for it now.

Process drawings, equipment lists and a site plan all help. Send what you have with your quote request.

FAQ

Industrial Building Questions

Can a steel building support an overhead crane?

Yes, when it’s designed for one from the start. The frames, columns and runway beams are sized for the crane’s capacity, span and type. Tell us the capacity, span, hook height and how often the crane will run, and we’ll include it in the design.

Can I add a crane to my building later?

Only if the building was designed for it. Adding a crane to a building that wasn’t usually means reinforcing the frames and foundations, which is costly. If a crane is likely in the next few years, plan for it now.

What's the difference between clear span and multi-span?

A clear-span building has no interior columns, so the whole floor is open. A multi-span building uses interior columns to support the roof, which can lower the cost of very wide buildings. The right choice depends on how you use the floor.

Can you include a mezzanine or office area?

Yes. Mezzanines and office areas are designed into the structure, with the loads they carry. Tell us what the mezzanine is for, such as storage, equipment or offices, so it’s sized correctly.

What do you need from me to quote an industrial building?

The size, location and use of the building, plus any cranes, mezzanines or heavy equipment. Door sizes, eave height and insulation needs help too. Drawings or a site plan make the quote more accurate.

How much does an industrial steel building cost?

It depends on size, loads, cranes, mezzanines, doors, insulation and scope. Crane and mezzanine loads in particular affect the frame design. Send us the details and we’ll quote your building.

Get started

Let's Build Something.

Tell us about your project. The more detail you share, the more accurate our quote.