Machine sheds, hay storage and livestock barns, built for your region’s snow loads and the equipment you actually run. We size the building around your operation, not the other way around.
Platinum Buildings designs and supplies pre-engineered steel buildings for farms, ranches and agricultural businesses across Canada. Our clients include grain and mixed farmers, cattle and livestock producers, and equestrian facilities.
What they have in common is a building that has to work hard. It stores expensive equipment, protects feed and crops, or houses animals through a Canadian winter. It has to fit the operation today and still make sense in ten years.
A pre-engineered steel building suits that kind of use. The frames are engineered for your site’s loads, the floor can be wide open, and the building can be planned to grow with you.
Combines, sprayers and air seeders keep getting wider and taller. Older buildings and doors often can’t take them.
Work on the building has to fit around seeding, haying and harvest. Delays push construction into the wrong season.
Farm buildings often stand alone in open country. They take the full force of wind and drifting snow.
Livestock, stored crops and temperature swings all bring moisture. Without a plan for it, condensation drips and steel corrodes.
Sizes vary widely, from a compact single-bay shed to a large clear-span arena. Sizes in our quotes are written as width × length, for example 40′ × 60′.
Wide, clear-span space to park and turn large equipment, with doors sized for your biggest machine. Often paired with a heated shop bay at one end.
Open-sided or fully enclosed buildings that keep feed and crops dry. If grain will be piled against the walls, the walls must be designed for that pressure from the start.
Buildings for cattle, sheep, hogs or poultry, planned around ventilation, pens and manure handling. Interior finishes are chosen to stand up to moisture and ammonia.
Large clear spans with no columns in the riding area, and enough eave height for a rider on horseback. Natural light and airflow make a big difference to the space.
Insulated, heated workshops for repairs and maintenance through the winter. Often fitted with overhead doors, a mezzanine for parts storage and a small office.
Snow load is set by the building code for your location and is expressed in kPa. It can change a lot between nearby areas. Roof shape matters too: snow drifts against taller buildings and slides off steeper roofs. We confirm your site’s loads before design starts.
A building in an open field sees more wind than one in town. Open-sided buildings, such as hay sheds, also carry different wind pressures than closed ones. Both are accounted for in the design.
Animals, stored crops and temperature swings all add moisture. Ridge vents, sidewall openings, insulation and vapour control keep condensation off equipment and feed. Livestock buildings need the most careful ventilation planning.
Measure your largest machine in its transport position, then add clearance. Large sliding, overhead or bi-fold doors need framing designed for the opening. It’s far easier to size a door right at the start than to enlarge it later.
Clear span means no interior columns. It gives you room to turn equipment and use the full floor. In very wide buildings, a few interior columns can lower cost if the layout allows. We’ll show you both options.
Manure, ammonia and humidity are hard on steel. Liner panels, the right coatings and good ventilation protect the structure in livestock buildings and help it last.
Some provinces and municipalities treat farm buildings differently from commercial buildings. Others don’t. Check with your local authority early. We prepare drawings to support your permit application.
If you expect to expand, an endwall can be designed so the building can be lengthened later. Planning for it now costs far less than changing the building after it’s up.
Every agricultural project follows the same six steps as any other building. Here’s what we pay extra attention to on farm projects.
We start with your equipment, livestock or storage needs, and the season you want the building up.
Loads are confirmed for your exact site, including drifting, open exposure and any grain against the walls.
We prepare drawings to support your permit application, under your municipality’s rules for farm buildings.
Components are fabricated to the approved drawings, with coatings and liners suited to the use.
Delivery is planned around your farm calendar and site access.
We stay available to your crew while the building goes up.
Read the full step-by-step process, or see what goes into design and engineering.
You don’t need every answer before you request a quote. But thinking these through first makes the conversation faster and the quote more accurate.
Bring what you have, even if it’s a rough sketch on the back of a feed bill. We’ll fill in the rest together.
Start with your largest machine, measured in its transport position, then add room to walk around it and open doors. Size the door for that machine, not the average one. Think about the equipment you expect to buy in the next few years too. We’ll help you work through the layout before anything is drawn.
Snow load is set by the building code for your location and is expressed in kPa. It varies a lot across Canada, even within a province. We confirm the loads for your exact site, and allow for drifting where a lower roof sits next to a taller one.
It depends on your province, your municipality and how the building is used. Some farm buildings are treated differently from commercial buildings, and some aren’t. Check with your local authority early. We prepare drawings to support your application.
Yes, if you plan for it. An endwall can be designed so it can be removed and the building lengthened later. Tell us at the start if you expect to grow, so the design allows for it.
Yes, when they’re designed for it. Livestock buildings need good ventilation, moisture control and protection against corrosion from ammonia and humidity. Liner panels and the right coatings help the building last in that environment.
It depends on size, snow and wind loads at your site, doors, insulation and scope. Two buildings with the same footprint can price very differently. Send us your size, location and use, and we’ll quote your building.
Tell us about your project. The more detail you share, the more accurate our quote.