Our Process

From Concept to Erection

Six steps, one team. Here’s how a pre-engineered steel building moves from the first conversation to project support.

Overview

Six Steps, One Team

Every project follows the same six steps: concept, design and engineering, approval, manufacturing, delivery and project support. What changes is the detail: your site, loads, use and schedule.

Knowing what happens at each step, and what we need from you, keeps the project moving. Our team has worked every one of these stages first-hand. Read about our team.

Concept

Start With How You'll Use It

Every building starts with how you’ll use it. We talk through your site, your operation and your budget before anything is drawn.

What happens

  • We discuss what the building is for and how you’ll work inside it.
  • We look at size, eave height, doors and layout options.
  • We talk about budget. Price depends on size, loads, location and scope.

What you provide

  • What the building is for
  • Approximate size and eave height
  • Site location
  • Any sketches, photos or site plans
  • Your target timeline

What we deliver

  • A building concept sized to your use
  • A clear outline of what’s in scope and what isn’t
  • A quote
Design & Engineering

Engineered for Your Site

Once the concept is set, the building is engineered for your site and use. Loads, codes and details are worked out at this step. More about design and engineering.

What happens

  • Structural engineering coordination for your site’s snow, wind and seismic loads. Snow and wind loads are expressed in kPa, as used in Canadian codes.
  • Frames, bay spacing, doors and openings are laid out.
  • Accessories are confirmed: insulation, liner panels, mezzanines or cranes if needed.

What you provide

  • The exact site location
  • Decisions on doors, windows, insulation and finishes
  • Foundation or soils information, if you have it
  • Feedback on the drawings

What we deliver

  • Drawings for your review
  • An engineered building design
Approval

Sign-Off Before Steel Is Ordered

Before fabrication, you approve the final design and we prepare drawings to support your permit application. Approval of the permit itself rests with your local authority.

What happens

  • You review and sign off the final design.
  • Permit drawings are prepared for your application.
  • Any changes are settled before steel is ordered.

What you provide

  • Written approval of the final design
  • Your permit application to the local authority
  • Payment as set out in your agreement

What we deliver

  • Permit drawings
  • The final approved drawing set
Manufacturing

Built to the Approved Drawings

Your building is fabricated to the approved drawings. Manufacturing is where our team has spent the most time, and it shapes how we plan every job.

What happens

  • Shop drawings are released to fabrication.
  • Frames, secondary framing, cladding and trim are produced.
  • Components are checked before they ship.

What you provide

  • Updates on your foundation and site readiness
  • Any late changes in writing, so their effect on cost and schedule is clear

What we deliver

  • Fabricated building components
  • Updates on the production schedule
Delivery

To Your Site, in Planned Loads

Components ship to your site in planned loads, packed and labelled to match the drawings.

What happens

  • We schedule delivery with you.
  • Loads are packed and labelled to match the drawings.
  • A packing list comes with each shipment.

What you provide

  • Truck access to the site, with room to turn and unload
  • A finished foundation with anchor bolts in place

What we deliver

  • Your building package, delivered to site
  • IFC drawings for erection. IFC means Issued for Construction: the final drawings your crew builds from.
  • Packing lists to check each load against
Project Support

Support While Your Building Goes Up

Delivery isn’t the end of our job. We stay involved while your building goes up.

What happens

  • We answer your erector’s questions about drawings and details.
  • We help sort out shortages or damaged parts.

What you provide

  • A contact for your erector or site lead
  • Prompt notice of any issue found on delivery

What we deliver

  • A direct contact on our team
  • Help resolving questions in the field
Get started

Let's Build Something.

Tell us about your project. The more detail you share, the more accurate our quote.